- Standard: EN 10216-2 / BS EN 10216-2
- Steel Grade: P265GH | Steel Number: 1.0425
- Classification: Non-alloy quality steel (EN 10020)
- Tube Type: Seamless - Hot Finished and Cold Drawn
- OD Range: 10.2 mm to 711 mm
- Wall Thickness: 1.6 mm to 100 mm
- Test Category: TC1 and TC2
- Heat Treatment: Normalized (880–940°C), Air Cooled
- Min Yield Strength: 265 MPa (T ≤ 16 mm)
- Tensile Strength: 410 – 570 MPa
- Application: Boilers, Heat Exchangers, Pressure Vessels, Superheaters
- MTC: EN 10204 3.1 / 3.2, IBR, TPI Available
- RFQ: contact@pipingmaterial.sa
Get Benefits of Lowest Price When Buying from P265GH Seamless Carbon Steel Tubes Suppliers in Saudi Arabia
pipingmaterial.sa connects Saudi buyers directly to stockists holding EN 10216-2 P265GH seamless carbon steel tubes in Dammam, Al Jubail, Riyadh and Al Khobar. With 26 years of industry experience, our network delivers actual ex-stock pricing, EN 10204 3.1 MTC, and ADNOC and Saudi Aramco approved documentation.
- EN 10216-2 P265GH Technical Specification
- Types of EN 10216-2 P265GH Seamless Tubes Available in Stock
- EN 10216-2 P265GH Alloy Steel Seamless Tubes Size Chart
- Heat Treatment Conditions of EN 10216-2 P265GH Seamless Tube
- Chemical Composition of P265GH Steel High Pressure Boiler Tubes
- Mechanical Properties of 1.0425 P265GH Carbon Steel Seamless Tubes
- EN 10216-2 P265GH Seamless Carbon Steel Tube International Equivalent Grades by Country
- P265GH Seamless Carbon Steel Tubes Dimensional Tolerance
- HSN Code of EN 10216-2 P265GH Seamless Tube
- EN 10216-2 P265GH Seamless Tube Industry Applications in Saudi Arabia
- What is the difference between EN 10216-2 P265GH TC1 and TC2?
- What is the maximum temperature for P265GH seamless boiler tube?
EN 10216-2 P265GH Technical Specification
- Seamless: 10.2 mm to 711 mm OD
- Common stock: 21.3 mm to 219.1 mm
- Small bore: 10.2 mm to 60.3 mm
- Large bore: 244.5 mm to 711 mm
- 1.6 mm to 100 mm
- T/D ratio ≤ 0.025 to >0.10
- SCH 10, 20, 40, 80, 120, 160
- L ≤ 6000 mm: +10 mm tolerance
- 6000 < L ≤ 12000 mm: +15 mm
- L > 12000 mm: by agreement
- Random / cut-to-length available
- Normalized (N) - 880 to 940°C
- Cooling medium: Air
- Normalizing forming included
- Fully killed steel (fully deoxidized)
- Germany: Benteler, Salzgitter
- France: Vallourec and Mannesmann
- India: Jindal, ISMT, Maharashtra Seamless
- China: Baosteel, Tianjin Pipe
- Bare / Black varnished
- Hot finished (HFS)
- Cold drawn (CDS)
- Anti-rust oil coated
- Hydrostatic / Hydrotest
- Tensile and Charpy Impact (CVN)
- UT / ET (Eddy Current)
- Elevated temperature proof strength
- EN 10204 3.1 Mill Test Certificate
- EN 10204 3.2 (TPI: BV, SGS, Intertek)
- IBR Approval Certificate
- Heat Number and Chemical Cert
- TC1 - Standard testing category
- TC2 - Enhanced testing with UT/ET
- TC2 required for boiler pressure parts
- Impact test option at 0°C and -10°C
Types of EN 10216-2 P265GH Seamless Tubes Available in Stock
Saudi Arabia stockists supply the following P265GH tube types - all sizes with EN 10204 3.1 MTC, ex-stock or short lead time from Dammam and Jubail warehouse
Get Quotes from Top 10 P265GH Tube Stockists in Dammam and Jubail
Submit your RFQ and get quotes from ADNOC approved EN 10216-2 P265GH suppliers in Saudi Arabia, direct from stockists with no mediator involved
Send RFQ - Free and Instant
Purchase 1.0425 P265GH Carbon Steel Seamless Tubes in Various Dimensions at Factory Price in Al Khobar
EN 10216-2 P265GH Alloy Steel Seamless Tubes Size Chart
Common ex-stock sizes available from verified stockists in Dammam, Jubail and Al Khobar, Saudi Arabia
| Size in mm | OD in mm | Size in inch | 10 | 5 | 60 | 40 | 30 | 20S |
|---|---|---|---|---|---|---|---|---|
| 8 | 13.7 | 1/4 | 2 | |||||
| 15 | 21.3 | 1/2 | 2.11 | 1.65 | 2.5 | |||
| 25 | 33.4 | 1 | 2.77 | 1.65 | 3 | |||
| 40 | 48.3 | 11/2 | 2.77 | 1.65 | 3 | |||
| 150 | 168.3 | 6 | 3.43 | 2.77 | 5.5 | |||
| 200 | 219.1 | 8 | 3.76 | 2.77 | 10.81 | 7.04 | 6.35 | |
| 65 | 73 | 21/2 | 3.05 | 2.11 | 3.5 | |||
| 90 | 101.6 | 31/2 | 3.05 | 2.11 | 4 | |||
| 100 | 114.3 | 4 | 3.05 | 2.11 | 4.5 | |||
| 300 | 323.9 | 12 | 4.57 | 4.19 | 14.27 | 10.31 | 8.38 | 6.35 |
| 400 | 406.4 | 16 | 6.35 | 16.66 | 12.7 | 9.53 | 7.92 | |
| 500 | 508 | 20 | 6.35 | 2062 | 15.06 | 12.7 | 9.53 | |
| 600 | 609.6 | 24 | 6.35 | 24.59 | 17.45 | 14.27 | 9.53 | |
| 700 | 711.2 | 28 | 7.92 | 15.88 | 12.7 | |||
| 800 | 812.8 | 32 | 7.92 | 17.48 | 15.88 | 12.7 | ||
| 900 | 914.4 | 36 | 7.92 | 19.05 | 15.88 | 12.7 |
Find Stockists of EN 10216-2 P265GH Alloy Steel Seamless Tubes Who Provide Relevant Heat Treatment Conditions
Heat Treatment Conditions of EN 10216-2 P265GH Seamless Tube
Temperature: 880–940°C. Cooling medium: Air. Standard heat treatment for P265GH.
Hot forming completed in normalizing temperature range - acceptable as normalizing treatment.
P265GH is manufactured from fully killed (fully deoxidized) steel. Confirmed in MTC chemical cert.
Steel billet heated and rolled at high temperature. Final size achieved without cold working.
HFS tube further cold-drawn for tighter tolerance, better surface finish and dimensional accuracy.
Optional post-cold-draw stress relief for cold-drawn tubes. Specified at time of order.
Refer P265GH Steel High Pressure Boiler Tubes Equivalent and Mechanical Properties
Chemical Composition of P265GH Steel High Pressure Boiler Tubes
Steel grade P265GH (Steel Number 1.0425) - values in % by mass, per EN 10216-2
| Grade | Steel Number | C | Si | Mo | Ni | Mn | P max | S max | Cr | Al tot | Cu | V | Nb | Ti max | Cr+Cu +Mo+Ni |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P265GH | 1.0425 | ≤ 0,20 | ≤ 0,40 | ≤ 0,08 | ≤ 0,30 | ≤ 1,40 | 0,025 | 0,020 | ≤ 0,30 | ≥ 0,020 b | ≤ 0,30 c | ≤ 0,02 d | ≤ 0,010 d | 0,040 d | ≤ 0,70 |
Locate Available Material from Stock
Mechanical Properties of 1.0425 P265GH Carbon Steel Seamless Tubes
Room temperature and elevated temperature properties per EN 10216-2 - Wall thickness ≤ 60 mm
| Steel | Yield strength or proof strength R eH or Rp 0,2 for Wall Thick T min. | Tensile Strength Rm | Elongation A min. % a | |||||
|---|---|---|---|---|---|---|---|---|
| Grade | Steel number | T ≤ 16 | 40 < T ≤ 60 | 60 < T ≤ 100 | 16 < T ≤ 40 | t | l | |
| MPa | MPa | MPa | MPa | MPa * | ||||
| P265GH | 1.0425 | 265 | 245 | - | 255 | 410 to 570 | 21 | 23 |
Impact properties (option) - Minimum absorbed energy KV: Longitudinal 40 J at 0°C, 28 J at -10°C; Transverse 27 J at 0°C.
EN 10216-2 P265GH Seamless Carbon Steel Tube International Equivalent Grades by Country
P265GH (1.0425) is internationally cross-referenced under the following equivalent standards. Buyers in Saudi Arabia often source from these origins - always verify MTC before procurement.
United States (ASTM / ASME)
- ASTM A106 Grade B - seamless CS pipe
- ASTM A53 Grade B - seamless and welded
- ASTM A335 Grade P1 - high-temp alloy
- ASME SA-106 Grade B - boiler service
Germany / Europe (DIN / EN)
- DIN 17175 St 45.8 - seamless boiler tube
- DIN 1629 St 44.0 - seamless structural
- EN 10028-2 P265GH - pressure flat product
Japan (JIS / JISG)
- JIS G 3454 STPG 38
- JIS G 3456 STPT 38 - high-temp service
- JIS G 3461 STB 35 - boiler tube
United Kingdom (BS)
- BS 3059 Part 1 ERW 360
- BS 3059 Part 2 CFS 243
- BS EN 10216-2 P265GH - direct equivalent
India (IS / BIS)
- IS 2002 Grade 2 - pressure vessels
- IS 2041 Grade 2
Russia / Sweden (GOST / SS)
- GOST 10705 Grade 20 (Russia)
- SS 14 13 12 (Sweden)
P265GH Seamless Carbon Steel Tubes Dimensional Tolerance
Outside Diameter Tolerance
| OD D mm | Tolerances on D | Tolerances on T for a T/D ratio | |||
|---|---|---|---|---|---|
| ≤ 0,025 | > 0,025 ≤ 0,050 | > 0,050 ≤ 0,10 | > 0,10 | ||
| D ≤ 219,1 | ± 1% or ± 0.5mm whichever is the greater | ± 12,5% or ± 0.4mm whichever is the greater | |||
| D > 219,1 | ± 20% | ± 15% | ± 12,5% | ± 10% a | |
Inside Diameter Tolerance
| Tolerances on inside diameter | Tolerances on T for a T/d ratio | |||||
|---|---|---|---|---|---|---|
| d | d min | ≤ 0,03 | > 0,03 ≤ 0,06 | > 0,06 ≤ 0,12 | > 0,12 | |
| ± 1% or ± 2 mm whichever is the greater | (+ 2% ,0)or (+ 4 mm,0) | whichever is the greater | ± 20% | ± 15% | ± 12,5% | ± 10% a |
Connect Directly With P265GH Boiler Tube Stockists in Al Jubail, Saudi Arabia
Get multiple quotes with delivery estimates from PDO and EDO approved EN 10216-2 P265GH suppliers in Saudi Arabia
Request Quote NowHSN Code of EN 10216-2 P265GH Seamless Tube
Send your inquiry and get quotes from top KNPC approved EN 10216-2 P265GH suppliers in Saudi Arabia with fast delivery
- HSN 7304.19 - Seamless tubes, pipes of iron / steel (other)
- HSN 7304.39 - Other seamless tubes for pressure purposes
Get BS EN 10216-2 Seamless Steel Tubes With Various Testing for Power Generation and Petrochemicals
EN 10216-2 P265GH Seamless Tube Industry Applications in Saudi Arabia
Supplying boiler, power generation, oil and gas, petrochemical and desalination projects - verified stockists with EN 10204 3.1 MTC.
Ready to Order P265GH Seamless Tube? Get Your Quote from Riyadh Stockist Today
Submit your RFQ and connect directly with Qatar Gas approved EN 10216-2 P265GH suppliers in Saudi Arabia offering ex-stock at the lowest cost.
Get Free QuoteFrequently Asked Questions EN 10216-2 P265GH Seamless Tube
What is the difference between EN 10216-2 P265GH TC1 and TC2?
Hot finished / as-rolled
Normalized (N) or N+T
What is the maximum temperature for P265GH seamless boiler tube?
P265GH — Maximum Temperature Limits
Seamless boiler & pressure tube | EN 10216-2 | Grade P265GH
(general pressure service)
(short-term / code check)
Client Reference of EN 10216-2 P265GH Tube
Submit your RFQ and receive quotes from SABIC approved EN 10216-2 P265GH suppliers in Saudi Arabia with verified ex-stock and direct supplier contact.
