- Voltage Range: 33kV, 66kV, 110kV, 132kV, 220kV, 400kV, 500kV
- Cable Types: XLPE, EPR, Mass-Impregnated, PILC, Gas-Insulated
- Standards: IEC 60840, IEC 62067, BS 7870, AEIC CS9
- Conductor: Stranded Copper or Aluminium, Milliken Design
- Insulation: Cross-Linked Polyethylene, EPR
- Screen: Copper Wire & Tape Screen, Metallic Sheath
- Armour: Flat Wire, Round Wire, Steel Tape Armoured
- Outer Sheath: HDPE, PVC, LSZH
- Jacket: PVC, Hypalon, Polyurethane, LDHMW PE, TPR, Polyolefin
- Installation: Direct Burial, Duct Submarine, Aerial
- Shielded High Voltage Cable: Individual & Overall Screen Available
- EV HV Cable Options: Orange Sheath, Single-Core & Multi-Core
- MTC: EN 10204 3.1 / 3.2 / TPI Available

Get SEC Approved High Voltage Cable Suppliers in Saudi Arabia
Find SEC Approved HV Cable Suppliers in Saudi Arabia With Custom Specification
pipingmaterial.sa Pairs Directly With Pre-verified High Voltage Cable Stockists in Saudi Arabia, Eliminating Middlemen and Commission Layers. Every Distributor Listed Carries A Minimum Of 10 Years Of HV Cable Supply Experience Inside KSA, With Valid SEC, Saudi Aramco and SABIC Vendor Registration. Buyers Receive Simultaneous Competitive Quotations From Multiple High Voltage Cable Suppliers in Saudi Arabia, While Ex-Stock Of XLPE HT Cable, EPR Cable and Shielded High Voltage Cable From European, Japanese and Korean Manufacturers Remains Available For Prompt Delivery To All Major Saudi's Industrial Cities.Behind pipingmaterial.sa: 26 years of experience supplying steel, metal products & industrial cables to oil, gas and petrochemical companies across Middle East and South Africa. A B2B platform connecting Saudi buyers directly to actual cable stockists who keep high voltage cables in stock
About This Guide
Written by pipingmaterial.sa Expert Team: 26 years supplying high voltage cables to SABIC, Saudi Aramco, ADNOC projects
✓ 1000+ projects supplied across Yanbu, Jubail, Dammam, Riyadh
✓ Verified supplier to Fortune 500 energy companies in KSA
![]()
- High Voltage Cable Connector
- High Voltage Cable Technical Specifications
- How is a High Voltage Wire Constructed?
- Types of HV Cable
- HV Cable Voltage Classes
- Voltage Level & Standards Of NEOM HV Cable
- Automotive HV Cable Common Outer Sheath Materials
- Which Should You Choose XLPE vs EPR Insulation?
- High Tension Cable Standards Chart
- Approval Process and Delivery Time Of SEC HV Cable
- High Voltage Electric Cable Conductor Sizes
- Approved High Voltage Cables Manufacturers Stock Available in Saudi Arabia
- Shielded High Voltage Cable Testing
- EV High Voltage Cable and Automotive HV Cable Guide
- Comparison of High Voltage Lead Wire Insulation Materials
- Difference Between High Voltage Silicone Wire and Ignition Cable
- Installation Methods Of High Voltage Grounding Cables
- Compare High Voltage Grounding Cables and Earth Return Systems
- Difference Between High Voltage Coaxial Cable and High Voltage BNC Cable
- Delivery Timeline for High Voltage Cables to Saudi Arabia
- What is Selection Guide For EV Charging HV Cable ?
- How to Select the Right High Voltage Cable for Your Saudi Arabia Project ?
- Frequently Asked Questions for High Voltage Cables in Saudi Arabia
High Voltage Cable Connector
| Type | HN | MHV | BNC | SHV |
|---|---|---|---|---|
| Impedance | 50 © | 50 © | 50 © | 50 © |
| Rated voltage * | 1500 Vrms | 1600 Vrms | 500 Vrmss | 3500 Vrms |
| Standard | MIL-C-3643 | MIL-C-39012 | MIL-C-3608, JIS-C-5412, MIL-C-39012 | MIL-C-39012 |
| Frequency | DC to 4 GHz | DC to 300 MHz | DC to 4 GHz | DC to 300 MHz |
| Threaded | Bayonet | Bayonet | Bayonet |
High Voltage Cable Technical Specifications
pipingmaterial.sa Delivers Your Inquiry To Multiple Verified High Voltage Cable Suppliers in Saudi Arabia Simultaneously Without Delays and Middlemen Also No Commission Deducted From Either Party.
- Germany & Italy
- Japan & South Korea
- USA
- Finland
- 50 to 630 mm²
- 800 to 1600 mm²
- 1800 to 2500 mm²
- Custom Cross-Sections
- 33 kV & 66 kV
- 110 kV & 132 kV
- 220 kV & 400 kV
- 500 kV HVDC
- XLPE
- EPR
- Mass Impregnated HVDC
- Silicone Rubber High Temp
- IEC Type Test & Routine Test
- Partial Discharge Test
- Tan Delta & Impulse Voltage Test
- SEC Saudi Arabia Approval
- IEC Type Test Report
- Factory Acceptance Test
- Routine Test Certificate
- SASO & SEC Approval Letter
- Standard Drum Lengths
- Cut-to-Length on Request
- Wooden, Steel & Composite Drums
- Reusable Drum Deposit Arrangements
- Manufacturer Name & Year
- Voltage Rating & Core Count
- Conductor Size & Insulation Type
- Sequential Metre Marking
How is a High Voltage Wire Constructed?
Every Layer in A High Voltage Electric Cable is Design To Isolate, Protect and Carry Current At Elevated Potential . Understand Here High Voltage Wire Construction
- 1Conductor
Cu / Al, 50-2500 mm² - 2Conductor Screen
Semi-Con XLPE - 3XLPE Insulation
IEC 60840 - 4Insulation Screen
+ Metal Sheath - 5Bedding & Armour
Steel / Round Wire - 6Outer Sheath
HDPE / LSZH / PVC
Types of HV Cable
For System Reliability and Regulatory Compliance In Saudi Arabia Selecting The Correct Cable Type Is Critical, Refer Available Types








Other Cable Types
Offer Type Test Certified EV High Voltage Wire For Electric Vehicles in Al Jubail in Various Voltage Level & Standards
HV Cable Voltage Classes
| Voltage Class | IEC Standard | System Voltage | Insulation Type |
|---|---|---|---|
| High Voltage | IEC 60502-2 | 66 kV | XLPE |
| Extra High Voltage | IEC 60840 | 220 kV | XLPE / MI |
| High Voltage | IEC 60502-2 | 33 kV | XLPE / EPR |
| Extra High Voltage | IEC 62067 | 380 to 400 kV | XLPE |
| High Voltage | IEC 60840 | 132 kV | XLPE |
| EV HV Cable | ISO 6469 / LV 216 | 600 to 1000 V DC | Silicone / XLPE |
| High Voltage | IEC 60840 | 110 kV | XLPE |
| Ultra High Voltage | IEC 62067 | 500 kV | MI / XLPE |
Understand Which Voltage Rating and International Standard HV Cable is Required For The NEOM Project ?
Automotive HV Cable Common Outer Sheath Materials
| Material | Properties | Application |
|---|---|---|
| PE / HDPE | Moisture resistance | Underground |
| PVC | Cost-effective | Indoor / duct |
| LSZH | Low smoke | Tunnels, buildings |
Get XLPE and EPR Insulated High Tension Cable Stockists in Riyadh With Custom Conductor Sizes At Factory Price
Which Should You Choose XLPE vs EPR Insulation?
XLPE Insulated HV Cable
- 90°C continuous · 250°C short-circuit rated
- Dielectric loss: <0.0004 tan ´
- Weight: ~30% lighter vs. EPR
- Range: 33 to 400 kV
- Standards: IEC 60840 · IEC 62067
- Best for:cost-critical projects, HV transmission
EPR Insulated HV Cable
- 250°C short-circuit rated, 90°C continuous
- Flexibility: bending radius up to 6— OD
- Humidity resistance: >95% RH
- Vibration tolerance: industrial machinery rated
- Standards: IEC 60502-2, BS 7870
- Best for: petrochemical, offshore platforms, marine
High Tension Cable Standards Chart
| Standard | Voltage Range |
|---|---|
| IEC 60228 | All voltages |
| IEC 60840 | 30 to 150 kV |
| IEC 62067 | 150 to 500 kV |
| ISO 6469-3 | EV systems |
| IEC 60502-2 | 6 to 30 kV |
| SASO / SEC SCMS | Project-specific |
| AEIC CS9 | 5 to 138 kV |
| BS 7870 | Up to 33 kV |
Must Know How long does it take to supply SEC-approved HV cable and what documents are required for approval?
High Voltage Electric Cable Conductor Sizes
| Standard | Conductor Size | Voltage Rating |
|---|---|---|
| IEC 60228 | 630 mm² | 110 / 115 / 132 kV |
| IEC 60228 | 400 mm² | 110 / 115 / 132 kV |
| IEC 60228 | 2000 mm² | 132 / 380 kV |
| IEC 60228 | 800 mm² | 110 / 132 kV |
| IEC 60228 | 1200 mm² | 132 / 380 kV |
| IEC 60228 | 1000 mm² | 132 kV |
| IEC 60228 | 1600 mm² | 132 / 380 kV |
| IEC 60228 | 2500 mm² | 132 / 380 kV |
Approved High Voltage Cables Manufacturers Stock Available in Saudi Arabia
Share Your Voltage Class, Conductor Size and Required Length High Voltage Cable Stockists in Saudi Arabia With Verified Physical Inventory Will Respond On The Same Working Day.
Get Competitive Quotes for High Voltage Cables in Saudi Arabia SEC Approved, Ex-Stock, Same-Day Response
Send Your Voltage Class, Conductor Size, Core Configuration To Contact@pipingmaterial.sa, Multiple Verified High Voltage Cable Stockists in Saudi Arabia Will Respond Within One Working Day With Best-available Pricing and Delivery Schedule.
Request Free QuoteBuy 100 % Quality Tested High Voltage Electric Cable Ex-Stock With IEC 60840 and IEC 62067 Compliant
Shielded High Voltage Cable Testing
Before Accepting HV Cable For Any Project Saudi Electricity Company and Saudi Aramco Require Full Type Test and Routine-Test Documentation. Always Request The Following From Your High Voltage Cable Suppliers in Saudi Arabia
IEC Type Tests
- High-voltage withstand test
- Bending test
- Lightning impulse voltage test
- Switching impulse test
- Thermal stability and prequalification test
- Hot impulse test
Routine Tests
- Conductor resistance measurement
- High-voltage test
- Partial discharge measurement
- XLPE insulation thickness verification
- Capacitance measurement
- Visual and dimensional inspection
Sample Tests
- Insulation shrinkage test
- Outer sheath elongation
- Flame propagation test
- Water penetration test
After-Laying Tests
- DC hi-pot or AC withstand test
- Sheath integrity test 10 kV DC
- Time-Domain Reflectometry
- Thermal imaging of cable terminations
EV High Voltage Cable and Automotive HV Cable Guide
Voltage
- EV HV Cable: 600 to 1000 V DC
- Automotive HV Cable: 60 to 800 V DC
Outer Sheath
- EV HV Cable: Mandatory orange sheath
- Automotive HV Cable: Orange outer + orange conduit
Shielding
- EV HV Cable: Aluminium foil + drain wire shield
- Automotive HV Cable: Tinned copper braid shield
Temperature
- EV HV Cable: ˆ’40°C to +90°C
- Automotive HV Cable: ˆ’40°C to +125°C
Fluid Resistance
- EV HV Cable: Coolant, battery electrolyte
- Automotive HV Cable: Brake fluid, transmission oil
Saudi EV Charging
- AC Slow: 11 kV · 32 A
- DC Fast: 400 to 1000 V DC · 200 A
- DC Ultra: 800 V DC · 500 A
Comparison of High Voltage Lead Wire Insulation Materials
| Insulation Material | Max Operating Temp | Typical Use |
|---|---|---|
| EPR | 90°C | MV & special HV |
| XLPE | 90°C | HV & EHV cables |
| Oil-paper | 70-80°C | Legacy systems |
Difference Between High Voltage Silicone Wire and Ignition Cable
High Voltage Silicone Wire
- Temperature Range: -60°C to +200°C continuous
- Voltage Rating: 600V to 100kV
- Insulation: Silicone rubber highly flexible, non-toxic
- Applications: medical x-ray, Furnaces, ozone generators
- Colours: black, Red, clear; orange
- Advantages: Excellent arc resistance
High Voltage Ignition Cable
- Voltage Rating: Up to 40kV peak ignition pulse
- Insulation: Silicone or EPDM rubber jacket
- Core: solid copper or Spiral wound suppression core
- Applications:Industrial burners, Emergency generators
- Temperature: -40°C to +180°C jacket
- Standards: ISO 3808, SAE J2031, OEM
Installation Methods Of High Voltage Grounding Cables
| Installation Method | Armour Requirement | Minimum Burial / Clearance |
|---|---|---|
| HDPE Duct Bank | Unarmoured acceptable | Duct centre 1200 mm |
| Direct Burial | Flat wire or tape armour | 900 mm depth (HV) |
| Cable Tunnel | None required | N/A ventilated |
| Submarine | Round wire armour mandatory | Seabed burial 1.0 to 1.5 m |
| Cable Tray | None tray support | Clearance: 150 mm/layer |
Compare High Voltage Grounding Cables and Earth Return Systems
Proper Grounding Of Metallic Sheaths and Armour is As Important. Incorrect Bonding Of Shielded High Voltage Cable Sheaths Leads To Circulating Currents, Overheating And Cable Failure
Single Point Bonding
- Earth point: 1 end only
- Circulating sheath current: 0 A
- SVL rating required: 3 to 5 kV at open end
- Max route length: ‰¤ 500 m
- Voltage range: 33 kV to 132 kV
- Induced sheath voltage limit: ‰¤ 65 V
Cross Bonding
- Major sections: 3 equal minor sections
- Transposition points: 2 intermediate joints
- Induced voltage cancellation: ~100%
- Current rating retained: Full ampacity
- Voltage range: 220 kV to 400 kV EHV
- NEOM backbone: Cross-bonding 380 kV
Grounding Cable Specs
- Bare Cu conductor: 70 to 400 mm² stranded
- Insulated earth cable: Green / Yellow PVC
- Earth mat strip: 25 - 3 mm to 50 - 6 mm flat Cu
- Earth rod: ˜ 16 to ˜ 20 mm, 1.5 to 3 m length
- Soil resistivity : 50 to 500 ©·m
- Stock location: KSA, Jubail Industrial City
Request a Quote For SEC Approved HV Cables Ex-Stock in Saudi Arabia
Submit Your HV Cable Specification to contact@pipingmaterial.sa and Receive Competitive Quotes From Verified High Voltage Cable Suppliers in Saudi Arabia Within One Business Day.
Request Free Quote
Difference Between High Voltage Coaxial Cable and High Voltage BNC Cable
High Voltage Coaxial Cable
- Voltage Rating: 1kV to 100kV
- Inner Conductor: silver-plated copper or Bare copper
- Dielectric: air-spaced or polyethylene
- Outer Conductor: corrugated copper tube or Braided copper
- Jacket: PVC, PTFE LSZH
- Applications: x-ray apparatus, Pulse generators
High Voltage BNC Cable
- Connector Type: BNC
- Voltage Rating: Up to 5kV or 10kV
- Impedance: 50© or 75©
- Insulation: PTFE-rated
- Applications: Laboratory instruments
Delivery Timeline for High Voltage Cables to Saudi Arabia
| Delivery to | ||||
|---|---|---|---|---|
| Cable Type | Origin | Jeddah | Riyadh | Dammam Port |
| 33k to 132kV XLPE | Italy/ Germany | +3 Days Road | +2 Days Road | 14 to 21 Days Sea Freight |
| 33 to 66kV XLPE | Riyadh/ Bahra Cables | 3 to 5 Working Days | 2 to 4 Working Days | 1 to 3 Working Days |
| EV HV Cable | Korea/ Germany | +2 Days Road | +1 Day Road | 10 to 14 Days Air Freight |
| 220 to 400kV EHV XLPE | NKT/ Prysmian | +4 Days Road | +3 Days Road | 16 to 24 Weeks |
| HV Silicone Wire | Germany/ China | +1 Day Road | +1 Day Road | 7 to 10 Days Air Freight |
Before Submitting Your Inquiry Understand High Voltage Coaxial and Grounding Cables Selection Guide here
Refer Which Voltage Level, Insulation Type and Conductor Size Should Be Selected For An EV Charging Station
Conductor: Al 185-300 mm²
Insulation: XLPE
Standard: IEC 60502-2
Install: Direct burial / duct
Conductor: Cu / Al 400-630 mm²
Insulation: XLPE
Standard: IEC 60502-2
Install: Trefoil formation
Conductor: Cu 630-1000 mm²
Insulation: XLPE
Standard: IEC 60840
Install: Armoured, duct bank
How to Select the Right High Voltage Cable for Your Saudi Arabia Project ?
Use This Decision Guide To Select The Correct HV Cable Type Before Submitting Your Inquiry Faster Specification Reduces Supplier Response Time From Days To Hours.
| Selection Criteria | Option B | Option A | Option C |
|---|---|---|---|
| Conductor Material | Aluminum conductor | Copper conductor | - |
| System Voltage Level | 110-220 kV | 66-110 kV | ‰¥220 kV |
| Conductor Cross Section | 400-630 mm² | 240-400 mm² | 800-1000 mm² |
| Installation Environment | Underground | Indoor / duct | Subsea/tunnel |
| Insulation Materials | EPR | XLPE | Oil-paper (legacy) |
| Mechanical Stress Level | Medium | Low | High |
| Outer Sheath Type | PE / HDPE | PVC | LSZH |
| Thermal Rating | 90°C | 70°C | 105°C |
| Power Transmission Distance | Medium (5-30 km) | Short (<5 km) | Long (>30 km) |
| Service Life Requirement | 30 years | 25 years | 40+ years |
High Voltage Cable Project References in Saudi Arabia
Verified High Voltage Cable Stockists in Saudi Arabia on pipingmaterial.sa Have Supplied The Following Project Categories. Specific LOAS and Supply References Available On Request.
Find Dealers and Distributors of High Voltage Cables in Saudi Arabia
- Bahra Electric Cables, Riyadh
- Riyadh Cables Group, Al Jubail
- Saudi Cable Company (SCC), Jeddah
- Al Fanar Company, Riyadh
- IESSC Electrical Supplies, Dammam
- National Electrical Supply Co., Al Khobar
- Arabian Electrical Industries, Jubail
- Bin Laden Electro Mechanical, Jeddah
- Gulf Cables & Electrical Industries, Yanbu
Frequently Asked Questions for High Voltage Cables in Saudi Arabia
Send Your High Voltage Cable Specifications and Receive Competitive Quotes Today
Get Verified HV Cable Stockists in Saudi Arabia With Physical Inventory, Who Respond You On The Same Day You Email Your Specifications To contact@pipingmaterial.sa
Get Free Quote
