• Al Bandariyah, King Faisal Street, Al Khobar, Saudi Arabia
  • contact@pipingmaterial.sa
  • Connect to Stockists, Suppliers and Traders directly in Dammam, Riyadh, Jubail, Al Khobar
    Jeddah, Jordan, Kuwait, Iraq, Qatar, Bahrain and Oman
Home
back to top

ISO 6162 Flange

  • Home
  • ISO 6162 Flange
Technical Data
  • Standard: ISO 6162 | SAE J518
  • Sizes in Inch :1/2″ NB TO 48″NB
  • End:Threaded, Butt Weld, Socket Weld
  • Pressure:3000 PSI (CODE 61) & 6000 PSI (CODE 62)
  • Threads:NPT, BSPP, BSPT, METRIC, UNF
  • Equivalent:PARKER, SWAGELOK, HOKE, DK-LOK
  • Media: Hydraulic Oil, Air, Water, Gas, Steam, Hot Water , Cold Water , Sea Water , Chemical
  • MTC:EN 10204 3.1
  • RFQ:contact@pipingmaterial.sa
ISO 6162 Flange

Table Of Content

Table of Content

ISO 6162 Split Flange Media

ISO 6162 Split Flange Media
  • Hydraulic Oil
  • Air
  • Water
  • Gas
  • Steam
  • Hot Water
  • Cold Water
  • Sea Water
  • Chemical

Find Verified SAE J518 Split Flange Suppliers in Saudi Arabia At Unbelievable Prices

SAE J518 Split Flange Specification

Sizes
ISO 6162 2 Flange Sizes
  • Sizes : 3 to 50mm
  • Sizes:1/2″ NB TO 48″NB
  • Custom Size
Thread
ISO 6162 SAE Flange Thread
  • BSPP
  • BSPT
  • NPT
End
SAE J518 Flange End
  • Welding
  • Threaded
  • JIC
Pressure
ISO 6162 Hydraulic Flange Pressure
  • 3000 , 1000 Psi
  • 10000 Psi
  • 6000 Psi
Origin
ISO 6162 1 Flange Origin
  • Japanese, European
  • American, Korean
  • Indian
Standard Configurations
Flange SAE ISO 6162-1 Standard Configurations
  • Tube to Tube, Female Connector
  • Tube Closure, Ferrule Set
  • Tube to Male, Weld Connector
Types
ISO 6162 Flange Types
  • Split Flange
  • ORFS Flange Adapter
  • 90 Degree Elbow Flange
Testing
ISO 6162 1 Flange Testing
  • Repeat assembly test
  • Hydrostatic testing
  • Burst and Impulse test
Documentation
ISO 6162 Hydraulic Flange Documentation
  • Third Party Inspection
  • 100% Radiography Test Report
  • NABL Approved Lab Reports

Now Direct Order to Flange SAE ISO 6162 2 Stockists in Riyadh Who Supply Size 1/8 to 4" or Custom

Dimensions Chart of ISO 6162-1 Flange

Dimensions Chart of ISO 6162-1 Flange

Check ISO 6162 Flange Suppliers in Saudi Arabia, Gives Accurate Dimensions Chart for Flanges.

Nominal Flange2.05 to 31.05 MPa Series (SAE Code 61)O-Rings
SizeClamping ScrewsFlange Half and Bolt Pattern-
D3Screw Holes--Parker
(in)(mm)Type IType II (SAE J518)CJWYL5L6ISO 3601-1O-Ring
Threadt1 Min. depthThread (UNC)t1 Min. depth±0.025maxmin±0.025RefID x SectionSize
1/213M8 x 1.02512.055/16 - 182438.0154.0953.0117.0546131919 x 3.0552-210
125M10 x 1.0514.053/8 - 162252.0470.0669.0126.0259162232.05 x 3.0552-219
3 1/289M16 x 228.055/8 - 1133120.07153.09150.0969.09140222897.05 x 3.0552-241
4102M16 x 225.055/8 - 1130130.02163.06160.0377.081522535112 x 3.0552-245
2 1/264M12 x 1.07521.051/2 - 133088.09115.08112.0850.08109193869 x 3.0552-232
376M16 x 228.055/8 - 1130106.04136.07133.0461.09131224185 x 3.0552-237
3/419M10 x 1.0516.053/8 - 162247.0665.0864.0322.0352142225 x 3.0552-214
1 1/432M10 x 1.0516.057/16 - 142858.0780.0378.0530.0273144)2437.05 x 3.0552-222
251M12 x 1.07519.051/2 - 132777.08103.01100.0142.0997162656 x 3.0552-228
1 1/238M12 x 1.07519.051/2 - 132769.0994.0593.0035.0783162547.05 x 3.0552-225
5127M16 x 227.055/8 - 1133152.04182.06185.0792.011812841136 x 3.0552-253

3000 PSI Series Code 6162 Flange Dimensions

Genuine ISO 6162 Flange Suppliers offering Acuurate Sizes as per Clients Need

DNPIPE SIZEФdФd1Фd21Lhh1BB1TA'0' RING SIZEHEX.0HD.0CAP SCREW SIZE
INCHMMODxWTAFH
AFU
1/2"1320.00x3.002014.0030.0230601319544638.0117.0518.064x3.053M8x25/ 5/16"_18UNC x 11/4"
22.00x2.002218.00
21.03x2.062216.00
---M8x40/ 5/16"_18UNC x 11/2"
---
---
1"2530.00x4.003022.0044.0440801624705952.0426.0232.092 x 3.053M 10x30/ 3/8"_16UNC x 11/4"
35.00x4.003527.00
33.07x3.023427.00
38.00x2.053833.00M 10x45/ 3/8"_16UNC x 2"
38.00x4.003830.00
   
3/4"1922 x 2.002218.0038.0135701422655247.0622.0324.099 x 3.053M 10x30/ 3/8"_16UNC x 11/4"
25.00x3.002519.00
26.09x3.062719.05
   M 10x40/ 3/8"_16UNC x 11/2"
   
   
11/2"3838.00x4.003830.0060.03501001625948369.0935.0747.022x3.053M 12x35/ 1/2"_13UNC x 11/2"
42.00x3.004236.00
48.03x4.054939.00
48.03x6.034935.05M 12x50/ 1/2"_13UNC x 2"
   
   
11/4"3238.00x4.003830.0050.0845901622807358.0730.0237.069x3.053M 10x30/ 7/16"_14UNC x 11/2"
42.00x3.004236.00
42.03x3.024336.00
42.04x5.064331.02M 10x50 / 7/16"_14UNC x 2"
   
   
2"5142.00x3.004236.0071.046012016261029777.0842.0956.074 x 3.053M 12x35/ 1/2"_13UNC x 11/2"
42.03x3.024336.00
48.03x3.024942.00
60.03x5.066149.00
60.03x8.006144.00M12x50/ 1/2"_13UNC x 2"

6000 PSI Series ISO 6162-2 Split Flange Dimensions

Split Flanges According To The Iso 6162-2 / Sae 6000
Part N°DNPN bar1FØ TØ JØ DUGG/2OQFF/2Bolts
MetricUNC
DB-6000-1/2"-M/U134007.28.724.632.5169.156.540.523.685/16"
DB-6000-2"-M / U / ISO51400122167.680.23722.213396.856.9203/4"
DB-6000-3/4"-M/U194008.210.532.5421911.97150.830103/8"
DB-6000-1"1/4-M324009.81544.554.82715.859566.738.614-
DB-6000-1"1/2-M/U38400121751.664.33018.2511379.447.5165/8"
DB-6000-1"1/4-U / ISO*324009.813.544.554.82715.859566.738.6121/2"
DB-6000-1"-U2540091238.848.42413.858157.134.8-7/16"
DB-6000-1"-M2540091338.848.42413.858157.134.812-

Types of ISO 6162 Flange

Buy Different Types of Flange from ISO 6162 Flange Traders in Saudi Arabia

Metric Male Bite Type Flange Adapter
Metric Male Bite Type Flange Adapter
90 Degree Elbow Flange Adapter
90 Degree Elbow Flange Adapter
ISO 6162 Flange
ISO 6162 Flange
JIC 37 Degrre Elbow Flange Adapter
JIC 37 Degrre Elbow Flange Adapter
ISO 6162 Split Flange
ISO 6162 Split Flange
Male ORFS Flange Adapter Fitting
Male ORFS Flange Adapter Fitting

Buy ISO 6162-1/-2 Flange in Various Types With Pressure 3000 and 6000 PSI (Code 61 & Code 62)

SAE J518 Flange Pressure Rating

Genuine ISO 6162 Flange Stockists in Saudi Arabia, offering a wide range of products with Pressure Rating

Dash SizeInch SizeCODE 61 SAE J518-1 / ISO 6162-1
Max Working PressureGrade 8 And Equivalent Fastener Torque Value
PSIMPASocket Head Unc (Lb-ft)Hex Head UNC (Lb-ft)
-81/2"5000352418
-241 1/2"30002111180
-322"30002111180
-402 1/2"250017.511180
-123/4"5000354433
-161"4600324433
-201 1/4"4000286852
-483"230016218160
-563 1/2"5003.5218160
-644"5003.5218160
CODE 62 SAE J518-2 / ISO 6162-2
Dash SizeInch SizeMax Working PressureGrade 8 And Equivalent Fastener Torque Socket Head UNC Value
PSIMPA(LB-FT)HEX HEAD UNC (LB-FT)
-123/4"6000404433
-161"6000406852
-402 1/2"600040N/A605
-81/2"6000402418
-201 1/4"60004011180
-241 1/2"600040218160
-322"600040332281

Seal Size of ISO 6162 Flange

Get ISO 6162 Flange Suppliers in Saudi Arabia, Provides an Outstanding Sizes for Flanges.

0'RINGS
DNØ int. x Ø toreAssemblyPart N°
3/8"17.12 X 2.623000 - PN 250/400JT 1712-262
1/2"18.64 X 3.533000/6000 - PN 250/400JT 1864-353
3"1/298.02 X 3.533000 PSIJT 9802-353
3"1/285.32 X 3.53PN 250JT 8532-353
3"1/285.09 X 5.33PN 400JT 8509-533
2"1/269.44 X 3.533000 PSI - PN 250JT 6944-353
1"1/437.69 X 3.533000/6000 - PN 250/400JT 3769-353
1"1/247.22 X 3.533000/6000 - PN 250/400JT 47.22-353
2"56.74 X 3.533000/6000 - PN 250/400JT 56.74-353
3"75.57 X 5.33PN 400JT 7557-533
4"110.72 X 3.533000 PSIJT 11072-353
4"98.02 X 3.53PN 250JT 9802-353
4"88.27 X 5.33PN 400JT 8827-533
Get ISO 6162-1 SAE Flange With Threaded and Socket Weld Connection, Refer Torque Chart

ISO 6162-1/-2 Tightening Torque

Find Wide Stock of ISO 6162 Flange Stockists in Saudi Arabia providing Excellent Torque Chart

Metric ScrewDia. screwsM 8M 6M 12M 10M 16M 14M 20M 24M 18M 22M 27
Couple Maxi da Nm3,211372314,945713261110
UNC ScrewDia. screws3/4"3/8"5/16"1/2"7/16"5/8"
Couple Maxi da Nm496,33,515,61030

ISO 6162 Split Flange Stock Sizes

View ISO 6162 Flange Suppliers in Saudi Arabia, Provides a Wide Range of Sizes.

SeriesFlage SizePort SizeFace TypePort Style
SAE J518 C62 / ISO 6162-21/2NAO-ring FaceFlange Plug
SAE J518 C62 / ISO 6162-23/4NAO-ring FaceFlange Plug
SAE J518 C62 / ISO 6162-21NAO-ring FaceFlange Plug
SAE J518 C62 / ISO 6162-21 1/4NAO-ring FaceFlange Plug
SAE J518 C62 / ISO 6162-21 1/2NAO-ring FaceFlange Plug
SAE J518 C62 / ISO 6162-22NAO-ring FaceFlange Plug
SAE J518 C62 / ISO 6162-21/21/2NoneFlange Clamp
SAE J518 C62 / ISO 6162-21/21/2NoneFlange Clamp
SAE J518 C62 / ISO 6162-23/43/4NoneFlange Clamp
SAE J518 C62 / ISO 6162-23/43/4NoneFlange Clamp
SAE J518 C62 / ISO 6162-21 1/41 1/4NoneFlange Clamp
SAE J518 C62 / ISO 6162-21 1/41 1/4NoneFlange Clamp
SAE J518 C62 / ISO 6162-21 1/21 1/2NoneFlange Clamp
SAE J518 C62 / ISO 6162-21 1/41 1/4NoneFlange Clamp
SAE J518 C62 / ISO 6162-211NoneFlange Clamp
SAE J518 C62 / ISO 6162-211NoneFlange Clamp
SAE J518 C62 / ISO 6162-21 1/21 1/2NoneFlange Clamp
SAE J518 C62 / ISO 6162-222NoneFlange Clamp
SAE J518 C62 / ISO 6162-211NoneFlange Clamp
SAE J518 C62 / ISO 6162-21 1/21 1/2NoneFlange Clamp
SAE J518 C62 / ISO 6162-222NoneFlange Clamp
SAE J518 C62 / ISO 6162-222NoneFlange Clamp
SAE J518 C62 / ISO 6162-21/21/2NoneFlange Clamp
SAE J518 C62 / ISO 6162-23/43/4NoneFlange Clamp
SAE J518 C62 / ISO 6162-21/21/2O-ring FaceSocket Weld for Pipe
Discover Flange SAE J518 ISO 6162 Ex.Stock in Various Material With BSPP, NPT, BSPT Thread

Flange SAE J518 ISO 6162 Threads

BSPPBritish Standard Pipe Parallel
BSPTBritish Standard Pipe Taper
NPTNational Pipe Taper
UN/UNFUnified National (Fine)
MetricMetric ISO Thread

Normalization of ISO 6162-2 Flange

TypesStandards
Sae Type Rectangular Flanges And Flanged Head To Be Welded
  • NORM ISO
  • (NORM AFNOR)
  • NORM U.S.A.
  • ISO 6162-1 and 2 to 2002
  • ( NF E 48-055 12/86 )
  • SAE J 518
Cetop And Siderurgie Type Square Flanges And Flanged Head To Be Welded
  • AFNOR
  • RECOMMENDATION
  • NF E 48-054 12/98
  • CETOP RP 63 H
  • ISO 6164 05/94
Metric Bolts And Nuts
  • AFNOR
  • DIN
  • U.S.A.
  • NF EN ISO 4762 12/97 912
  • According to American standard
0-RINGS
  • USA
  • AFNOR
  • SAE J 515
  • NF T 47 501 04/98

Machining of ISO 6162 Split Flange

Explore ISO 6162 Flange Traders in Saudi Arabia with High Strength and Recyclability

FlangesFlanges Head
  • Untreated external surfaces
  • Reaming Ra = 6,3
  • Internal face Ra = 6,3
  • All external sections Ra = 6.3
  • Bearing surfaces of seals and grooves Ra = 1,6
  • Pass Ra = 6,3

Applications of ISO 6162 Hydraulic Flange

Find Leading ISO 6162 Flange Suppliers who supplies in various Application Industries

  • Mobile Hydraulics
  • Construction Machinery
  • Agricultural Machinery
  • Forestry Equipment
  • Material Handling
  • Oil and Gas Industry
  • Mining Equipment
  • Large Diameter Piping
  • Industrial Machinery

ISO 6162 Flange Supplied In Following Cities

ProductProject NameLocation
ISO 6162 Split FlangeOil and Gas Equipment IndustriesDammam, Saudi Arabia
ISO 6162 Hydraulic FlangeNoorma Healthy Water CompanyRiyadh, Saudi Arabia
ISO 6162 SAE FlangeAL ABRAR ICE FACTORY YANBUYanbu, Saudi Arabia
ISO 6162 1 FlangeShoft Shipyard Pvt. Ltd.Ha’il, Saudi Arabia
Products
Buy Online
Best Price
Contact

© 2026 pipingmaterial.sa — All Rights Reserved

Meet verified exporters, suppliers, distributors, manufacturers and actual stockist. Fast and easy way to buy duplex steel and high nickel alloys. Direct connect with stockholders and suppliers. Trusted by thousands of engineers since 2016. Pipingmaterial.sa help buyers to procure seamless pipes, tubing, bars, nut bolt, flanges and pipe fittings in saudi arabia. Refer pipingmaterial.sa for stock sizes, weight chart, quick quote, multiple competitive price list and nickel alloys material for shutdown projects. 100+ brands in stock including Sandvik, Vallourec & Mannesmann, Tenaris, Seah Steel Corp., Welspun, Tubacex, Outokumpu, Viraj, Ulma, Erne Fittings, Jindal, and many more. Send inquiry and get multiple quotes from Top 10 Verified Suppliers. Guaranteed fast quote, competitive price and quick delivery in Saudi Arabia.

⚡ FAST RESPONSE Get Quote in 2 Hours We respond quickly
📧 Your Email 📱 Your WhatsApp No. 🔍 What are you looking for?— choose how to reach you —
🛡️ Free quote · No commitment
Get Quote in 2 Hrs ‹
⚡ FAST RESPONSE Get Quote in 2 Hours We respond quickly
📧 Your Email 📱 Your WhatsApp No. 🔍 What are you looking for?— choose how to reach you —
🛡️ Free quote · No commitment