Pipe Fittings

Request your quotation directly from Aramco-approved Pipe Fittings Stockists in Saudi Arabia , no middlemen, original MTC pack included

Pipe fittings are parts used to connect and control the flow of liquids or gases in industrial pipelines. Choosing the wrong type, material, or size can cause project delays, failures, and expensive repairs on oil and gas sites in Saudi Arabia.

Pipe fittings are categorized based on how they connect to pipes. Different types are used for different pressure levels and working conditions on major oil and gas projects in Saudi Arabia like Aramco, SABIC, and SWCC

45° Elbow

ASME B16.9 • 1/2"-48" NPS

• Radius: 1.5D • Angle: 45°
• SCH 40 to XXS • Seamless & Welded
• CS A234 WPB • SS A403 • Alloy WP11

90° Elbow

ASME B16.9 • LR & SR

• LR = 1.5D • SR = 1.0D (ASME B16.28)
• NPS 1/2" to 48" • SCH 10 to XXS
• NACE MR0175 • EN 10204 3.1 MTC

180° Return Elbow

ASME B16.9 • LR & SR

• U-bend • Replaces 2 × 90° elbows + spool
• NPS 1/2" to 24" • LR & SR available
• Heat exchanger coils • Hairpin loop service

Long Radius Elbow

Radius = 1.5D • ASME B16.9

• C-to-F = 1.5 × NPS • Lowest pressure drop
• Slurry • Abrasive • Viscous media lines
• Seamless mandatory on Aramco SAMSS-001

Short Radius Elbow

Radius = 1.0D • ASME B16.28

• C-to-F = 1.0 × NPS • Compact footprint
• NPS 1/2" to 24" • Offshore & congested racks
• Higher ΔP vs LR • use only space-restricted

Equal Tee

ASME B16.9 • 3 Equal Outlets

• All 3 outlets same NPS • 1/2" to 48"
• Process headers • Distribution manifolds
• CS A234 WPB • SS A403 • Ex-stock KSA

Reducing Tee

ASME B16.9 • Run × Branch NPS

• Format: 6" × 6" × 4" (Run × Run × Branch)
• No Weldolet needed • Single fitting solution
• All SCH • Seamless & Welded options

Lateral Tee

ASME B16.9 • 45° Branch Angle

• Branch angle: 45° • Lower turbulence vs 90° tee
• High-velocity gas • Two-phase flow lines
• Less common in stock • Order lead time: 4-8 wks

Concentric Reducer

ASME B16.9 • Coaxial Centrelines

• Both centrelines aligned • Vertical runs only
• 3/4" × 1/2" to 48" × 40" NPS range
• Vapour lines • Gas service • No liquid pocket

Eccentric Reducer

ASME B16.9 • FSU / FSD

• FSU: Flat side up • Liquid lines / no gas pocket
• FSD: Flat side down • Pump suction nozzles
• Mandatory at pump suctions • Aramco SAMSS

Short Stub End

ASME B16.9 Type B • Short Length

• Type B • Compact face-to-face dimension
• Lap-joint flange pairing • Bolt-hole rotation
• CS & SS A403 304L / 316L • All schedules

Long Stub End

ASME B16.9 Type A • Full Length

• Type A • Full bore length • Max flange travel
• NPS 1/2" to 24" • SABIC SS piping standard
• A403 304L / 316L • Pickle & passivated finish

Lap Joint Stub End

CS Flange + SS Stub • Cost Save

• CS lap flange + SS stub • Up to 40% cost saving
• Flange reusable across shutdowns • Stub replaced only
• SWCC desalination • Seawater cooling lines KSA

End Cap

ASME B16.9 • 1/2"-48" NPS

• Dished profile • Full-penetration BW joint
• Pressure-tested to 1.5 × design pressure
• A234 WPB & A403 SS • Ex-stock Dammam

Equal Cross

ASME B16.9 • 4-Way Equal

• 4 equal outlets • NPS 1/2" to 24"
• Fire suppression • Water distribution headers
• SW & BW end connection • CS & SS grades

Reducing Cross

ASME B16.9 • Run × Branch NPS

• Branch NPS < Run NPS • 1 fitting = 2 tees
• Complex utility manifolds • Cost saving
• Non-stock item • Confirm before MTO

Pipe Bend

3D / 5D / 10D • API 5L

• Radius: 3D / 5D / 10D • Angle: 15°-180°
• Hot induction • Cold-formed • Custom OD
• API 5L X42-X70 • ASTM A234 WPB grades

Buttweld Saddle

ASME B16.9 • OD Contoured

• OD-matched contour • Full branch reinforcement
• Stronger than Weldolet • Large-bore headers
• CS & SS • Custom OD matching on request

pipingmaterial.sa connects buyers directly with pipe fittings suppliers in Saudi Arabia without agents or hidden costs. You get direct contact with Aramco-approved suppliers and proper mill documentation

Pipe Fittings Stockists in Dammam

Pipe Fittings Suppliers in Al Jubail

Pipe Fittings Stockists in Al Khobar

Pipe Fittings Stockists in Riyadh

Choosing between buttweld and socket weld fittings is important because it affects how strong the joint is, the pressure rating, whether it meets codes, and how much inspection costs on Saudi projects.

Choosing the right material for pipe fittings in Saudi Arabia depends on what fluid flows through, the temperature, whether it's corrosive, and how much pressure it handles.

All pipe fittings used on Saudi Aramco, SABIC, SEC, and SWCC projects must meet ASME, MSS, or SASO standards. Different fitting types follow different standards for safety and quality.

The schedule chart below shows wall thickness in millimeters for different pipe sizes in SCH 40, SCH 80, and SCH 160 the most common schedules used on oil, gas, and petrochemical projects in Saudi Arabia.

Elbows are the most commonly used pipe fittings on Saudi Aramco, SABIC, and Maaden projects. Choosing the right elbow radius, schedule, and material is important to avoid having to redo the drawings and fabrication work.

Pipe fittings are essential for every piping system built in Saudi Arabia. They are used in different ways across oil and gas projects in the Eastern Province, Riyadh, and Yanbu, covering almost all types of project needs.

Centre-to-face and end-to-end dimensions are important measurements for checking technical drawings and approving pipe fabrication work on Saudi Arabia projects. All measurements follow the ASME B16.9 standard in millimetres.

Fitting weights are needed to plan shipping costs, calculate how much weight the structure can support, and keep track of materials on Saudi Arabia projects.

Pipe fitting prices in Saudi Arabia depend on global steel prices, where they're made, the type, size, how many you need, delivery time, and certifications. Always ask pipe fittings suppliers in Saudi Arabia for a detailed quote that includes mill certificates, packing, and delivery to your site

Saudi Aramco requires all pipe fittings to follow their specific standards and rules (SAMSS and AES) for different types of work.

pipingmaterial.sa Has Supplied ASME B16.9 Buttweld Fittings, Seamless Fittings, and Industrial Pipe Fittings To Major Oil & Gas, Petrochemical, Power Generation, and Industrial Projects Across the GCC Region