• Al Bandariyah, King Faisal Street, Al Khobar, Saudi Arabia
  • contact@pipingmaterial.sa
  • Connect to Stockists, Suppliers and Traders directly in Dammam, Riyadh, Jubail, Al Khobar
    Jeddah, Jordan, Kuwait, Iraq, Qatar, Bahrain and Oman
Home
back to top

Stainless Steel Hex Bar

  • Home
  • Stainless Steel Hex Bar
Why Saudi Arabia's Buyers Pick pipingmaterial.sa for Stainless Steel Hex Bar
All SS Grades Ex-Stock
304, 304l, 316, 316l in KSA & UAE
RFQ
Top 10 Stockist Quotes
Direct Mill Rate • Zero Commission
Saudi Aramco & SABIC Approved
Registered Mill Network
ASTM A276 / A479
Mill Test Certificate Included
Pan-KSA Dispatch
Door Delivery to Project Site
Cut-to-Size Bars
No Minimum Order Quantity
Stainless Steel Hex Bar Highlights
  • A/F Range: 3 mm to 100 mm
  • Length: 1 m to 6 m, Cut to Size
  • Grades: 304, 304H, 304L, 309, 310, 316, 316H, 316L, 316Ti, 317, 321, 410, 416, 420, 430, 430F, 431, 17-4 PH, 15-5 PH, F51, F60
  • Standard: ASTM A276, A479, A484
  • ASME: SA-276, SA-479
  • Condition: Annealed, Cold Drawn, H&T
  • Finish: Black, Bright, Polished, Centerless Ground
  • Tolerance: K9, K10, K11, K12
  • Process: Hot Rolled, Cold Drawn, Forged
  • Origin: Europe, Japan, USA, Korea, India
  • MTC: EN 10204 3.1 / 3.2 with PMI Report
  • RFQ: Send Inquiry
Stainless Steel Hex Bar

Saudi Aramco Approved Stainless Steel Hex Bar Suppliers in Saudi Arabia With Mill Test Certificates

Table Of Content

Table of Content
Supplied To:
Jubail Riyadh Dammam Jeddah Al Khobar Ras Al-Khair Yanbu Dhahran Sudair Rabigh
Provide :
Saudi Aramco Approved SABIC Approved ADNOC Approved KNPC Approved EN 10204 3.1 MTC Ex-Stock Saudi Arabia

304 stainless Steel Hexagonal Rod and cut to Length SS 316 Hexagon bar in Dammam

Pipingmaterial.sa connects Saudi buyers directly with genuine stainless steel hex bar stockists across the Kingdom. These stockists carry austenitic, martensitic, ferritic and precipitation-hardening grades. Ready inventory is held across the Eastern Province and the Riyadh hub. The platform is built on 26 years of regional steel trading experience. A buyer in Dammam, Riyadh, or Jeddah can message a stockholder directly. They can also compare up to 10 quotes before placing an order. Every listed size carries traceable mill documentation

SS Hex Bar Specification

Stainless Steel Hex Bar Sizes
Stainless Steel Hex Bar Sizes
  • Diameter: 2mm~ 100mm
  • Length: 1- 6.0 m
  • Cut to Size
SS Hex Bar Origin
SS Hex Bar Origin
  • American, Korean
  • Japanese
  • Indian & European
ASTM A276 Stainless Hex Bar Shape
ASTM A276 Stainless Hex Bar Shape
  • Hexagonal
Stainless Steel Hexagon Bar Services
Stainless Steel Hexagon Bar Services
  • Cutting
  • Heat Treatment
  • Shearing
Stainless Hex Bar Testing
Stainless Hex Bar Testing
  • Hardness Testing
  • Chemical Analysis
  • Tensile Test
Stainless Steel Hex Bar Stock Documentation
Stainless Steel Hex Bar Stock Documentation
  • Third Party Inspection
  • 100% Radiography Test
  • MTC EN 10204/3.1B

Most Common Grades Of Stainless Steel Hex Bar

Click above to open the grade-wise hex bar specification, then pick a grade tab inside.

Hexagonal Stainless Steel Bar Stock

Stainless Steel Hex Bar

FormsHot & Cold Finished
Grades9 Available

Hex bar stock cut across the corners is supplied in austenitic, martensitic, precipitation-hardening and duplex families, machined to the same across-flats sizes regardless of grade. Select a grade tab below to view its chemical composition and mechanical properties.

Standard size range across all grades below: 3 mm to 100 mm A/F (across flats), hot-finished or cold-drawn, in random or cut lengths up to 6 m. Larger sizes confirmed on request.
UNS S30400 W.Nr. 1.4301 Family Austenitic Magnetic No (Annealed)

304 Mechanical Properties

Annealed condition · per ASTM A276
75
ksi min
Tensile Strength
30
ksi min
Yield Strength
40
% min
Elongation
Hardness ≤ 92 HRB · Reduction of Area ≥ 50% · per ASTM A276 / ASME SA276
Standards
ASTM A276 ASTM A479 ASME SA276 ASME SA479
Surface Finish
Hot Rolled / Black
Bright / Polished
Cold Drawn
Not heat-treatable to harden; gains strength only through cold working.

304 Chemical Composition

Weight % · per ASTM A276
Cr 18.0–20.0% Ni 8.0–11.0% C ≤ 0.08% Mn ≤ 2.00% Si ≤ 1.00% P ≤ 0.045% S ≤ 0.030%
Fe balance · general-purpose 18-8 austenitic grade · not stabilized against carbide precipitation
Heat Treatment Condition
Condition A - Annealed
Weldability & Machinability
Excellent welding
Moderate machinability
Most widely specified general-purpose stainless grade worldwide.
Typical Applications
Food & Beverage Equipment Architectural Fittings Chemical Processing Fasteners & Shafts General Engineering
UNS S30403 W.Nr. 1.4307 Family Austenitic Magnetic No (Annealed)

304L Mechanical Properties

Annealed condition · per ASTM A276
70
ksi min
Tensile Strength
25
ksi min
Yield Strength
40
% min
Elongation
Hardness ≤ 92 HRB · Reduction of Area ≥ 50% · per ASTM A276 / ASME SA276
Standards
ASTM A276 ASTM A479 ASME SA276 ASME SA479
Surface Finish
Hot Rolled / Black
Bright / Polished
Cold Drawn
Slightly lower strength than 304; carbon capped for as-welded corrosion resistance.

304L Chemical Composition

Weight % · per ASTM A276 · Low-carbon variant of 304
Cr 18.0–20.0% Ni 8.0–12.0% C ≤ 0.030% Mn ≤ 2.00% Si ≤ 1.00% P ≤ 0.045% S ≤ 0.030%
Fe balance · low-carbon version eliminates chromium-carbide precipitation after welding
Heat Treatment Condition
Condition A - Annealed
Weldability & Machinability
Excellent welding
Moderate machinability
Specify in place of 304 wherever heavy-gauge welding is involved.
Typical Applications
Welded Pipe Spools Pharmaceutical Equipment Marine Fittings Pulp & Paper Plant Cryogenic Service
UNS S31600 W.Nr. 1.4401 Family Austenitic Magnetic No (Annealed)

316 Mechanical Properties

Annealed condition · per ASTM A276
75
ksi min
Tensile Strength
30
ksi min
Yield Strength
40
% min
Elongation
Hardness ≤ 95 HRB · Reduction of Area ≥ 50% · per ASTM A276 / ASME SA276
Standards
ASTM A276 ASTM A479 ASME SA276 ASME SA479
Surface Finish
Hot Rolled / Black
Bright / Polished
Cold Drawn
Molybdenum addition improves resistance to pitting in chloride and halide media.

316 Chemical Composition

Weight % · per ASTM A276
Cr 16.0–18.0% Ni 10.0–14.0% Mo 2.00–3.00% C ≤ 0.08% Mn ≤ 2.00% Si ≤ 1.00% P ≤ 0.045% S ≤ 0.030%
Fe balance · can be dual-certified as 316L when carbon meets the lower limit
Heat Treatment Condition
Condition A - Annealed
Weldability & Machinability
Excellent welding
Moderate machinability
Excellent toughness retained at cryogenic temperatures.
Typical Applications
Marine Hardware Pump & Valve Shafts Chemical Processing Pharma & Food Plants Offshore Structures
UNS S31603 W.Nr. 1.4404 Family Austenitic Magnetic No (Annealed)

316L Mechanical Properties

Annealed condition · per ASTM A276
70
ksi min
Tensile Strength
25
ksi min
Yield Strength
40
% min
Elongation
Hardness ≤ 95 HRB · Reduction of Area ≥ 50% · per ASTM A276 / ASME SA276
Standards
ASTM A276 ASTM A479 ASME SA276 ASME SA479
Surface Finish
Hot Rolled / Black
Bright / Polished
Cold Drawn
Low-carbon 316 variant recommended for welded service per Hydraxio data sheet.

316L Chemical Composition

Weight % · per ASTM A276 · Low-carbon variant of 316
Cr 16.0–18.0% Ni 10.0–14.0% Mo 2.00–3.00% C ≤ 0.030% Mn ≤ 2.00% Si ≤ 1.00% P ≤ 0.045% S ≤ 0.030%
Fe balance · eliminates chromium-carbide precipitation in the as-welded condition
Heat Treatment Condition
Condition A - Annealed
Weldability & Machinability
Excellent welding
Moderate machinability
Preferred over 316 wherever post-weld corrosion resistance is critical.
Typical Applications
Heat Exchangers Mechanical Seals Surgical & Medical Devices Brewery Equipment Subsea Components
UNS S41000 W.Nr. 1.4006 Family Martensitic Magnetic Yes

410 Mechanical Properties

Annealed condition · per ASTM A276
65
ksi min
Tensile Strength
30
ksi min
Yield Strength
20
% min
Elongation
Hardness ≤ 96 HRB (annealed) · up to 217 HB cold drawn · hardenable to 35–39 HRC by Q&T
Standards
ASTM A276 ASTM A479 ASME SA276 ASME SA479
Surface Finish
Hot Rolled / Black
Bright / Polished
Cold Drawn
Martensitic grade - strength and hardness can be raised significantly by quench & temper.

410 Chemical Composition

Weight % · per ASTM A276
Cr 11.5–13.5% Ni ≤ 0.50% (typ.) C 0.08–0.15% Mn ≤ 1.00% Si ≤ 1.00% P ≤ 0.040% S ≤ 0.030%
Fe balance · basic 13% chromium martensitic grade
Heat Treatment Condition
Condition A - Annealed Condition T - Hardened & Tempered (high temp.) Condition H - Hardened & Tempered (low temp.)
Weldability & Machinability
Fair weldability
Good machinability (annealed)
Used hardened & tempered where mild corrosion resistance plus wear resistance is needed.
Typical Applications
Pump & Valve Components Turbine Blades Cutlery & Tooling Oil & Gas Wellhead Parts Fasteners
UNS S17400 W.Nr. 1.4542 Family Precipitation Hardening Magnetic Yes

17-4 PH Mechanical Properties

Condition H900 (peak strength) · per ASTM A564
190
ksi min
Tensile Strength
170
ksi min
Yield Strength
10
% min
Elongation
Hardness 420 HB (C44) at H900 · Charpy Impact 15 ft-lb min · ranges down to 125 ksi TS at H1150M
Standards
ASTM A564 ASTM A693 Gr. 630 AMS 5643 ASME SA564
Surface Finish
Solution Annealed (Cond. A)
Precipitation Hardened
Tunable from H900 (max strength) to H1150 (max toughness & SCC resistance) by aging temperature.

17-4 PH Chemical Composition

Weight % · per ASTM A564 · UNS S17400
Cr 15.00–17.50% Ni 3.00–5.00% Cu 3.00–5.00% Cb+Ta 0.15–0.45% C ≤ 0.07% Mn ≤ 1.00% Si ≤ 1.00%
Fe balance · precipitation-hardening martensitic grade, copper enables age hardening
Heat Treatment Condition
Condition A - Solution Annealed H900 / H925 / H1025 / H1075 / H1100 / H1150 / H1150M
Weldability & Machinability
Good weldability
Best machined in Cond. A
Corrosion resistance broadly comparable to 304; superior to 400-series grades.
Typical Applications
Aerospace Landing Gear Oil & Gas Valve Trim High-Strength Shafts Nuclear Components Injection Mould Tooling
UNS S15500 W.Nr. 1.4545 Family Precipitation Hardening Magnetic Yes

15-5 PH Mechanical Properties

Condition H900 (peak strength) · per ASTM A564
190
ksi min
Tensile Strength
170
ksi min
Yield Strength
10
% min
Elongation
Hardness ≈ 40–44 HRC at H900 · ranges down to ~28 HRC at H1150 · vacuum remelt microstructure
Standards
ASTM A564 AMS 5659 AMS 5862 ASME SA564
Surface Finish
Solution Annealed (Cond. A)
Precipitation Hardened
Refined, low-delta-ferrite version of 17-4 PH with superior transverse toughness.

15-5 PH Chemical Composition

Weight % · per ASTM A564 · UNS S15500
Cr 14.00–15.50% Ni 3.50–5.50% Cu 2.50–4.50% Cb+Ta 0.15–0.45% C ≤ 0.07% Mn ≤ 1.00% Si ≤ 1.00%
Fe balance · vacuum/arc remelted for a more uniform, lower-delta-ferrite microstructure
Heat Treatment Condition
Condition A - Solution Annealed H900 / H925 / H1025 / H1075 / H1100 / H1150 / Double H1150
Weldability & Machinability
Good weldability
Good forgeability & machinability
Preferred over 17-4 PH where improved toughness in larger cross-sections is required.
Typical Applications
Aircraft Structural Parts Marine Gas Turbine Components Nuclear Reactor Hardware Paper Mill Equipment Gears & Engine Parts
UNS S31803 W.Nr. 1.4462 Family Duplex Magnetic Yes

F51 Mechanical Properties

Solution annealed condition · per ASTM A182 / A276 / A479
90
ksi min
Tensile Strength
65
ksi min
Yield Strength
25
% min
Elongation
Hardness ≤ 270 HB (290 HBW per A182) · Charpy Impact 74 ft-lb (100 J) min at room temp.
Standards
ASTM A182 F51 ASTM A276 ASTM A479 NACE MR0175 / ISO 15156
Surface Finish
Hot Forged / Rolled
Cold Drawn
Solution Annealed
50:50 austenite-ferrite duplex microstructure gives roughly double the yield strength of 316L.

F51 Chemical Composition

Weight % · per ASTM A182 · UNS S31803 (Duplex 2205)
Cr 21.0–23.0% Ni 4.5–6.5% Mo 2.5–3.5% N 0.08–0.20% C ≤ 0.03% Mn ≤ 2.00% Si ≤ 1.00%
Fe balance · PREN ≈ 33–34 · cannot be hardened by heat treatment, only by cold work
Heat Treatment Condition
Solution Annealed at 1020–1120°C, water quenched
Weldability & Machinability
Readily weldable (no oxy-acetylene)
Machinable in annealed condition
Original broader-range duplex 2205 chemistry; tighter-range version is grade F60.
Typical Applications
Desalination Plants Offshore Oil & Gas Chemical Process Pumps & Valves Brewing Industry Power Generation
UNS S32205 W.Nr. 1.4462 Family Duplex Magnetic Yes

F60 Mechanical Properties

Solution annealed condition · per ASTM A182 / A276 / A479
105
ksi min
Tensile Strength
55
ksi min
Yield Strength
25
% min
Elongation
Hardness ≤ 255 HBW · solution treated ≥ 1020°C followed by rapid quench
Standards
ASTM A182 F60 ASTM A276 ASTM A479 NACE MR0175 / ISO 15156
Surface Finish
Hot Forged / Rolled
Cold Drawn
Solution Annealed
Nearly double the strength of 304/316 with markedly better chloride-SCC resistance.

F60 Chemical Composition

Weight % · per ASTM A182 · UNS S32205 (tighter-range Duplex 2205)
Cr 22.0–23.0% Ni 4.50–6.50% Mo 3.00–3.50% N 0.14–0.20% C ≤ 0.030% Mn ≤ 2.00% Si ≤ 1.00%
Fe balance · PREN > 34 · same nominal 22Cr-5Ni-3Mo-N alloy as F51 with a narrower, optimized range
Heat Treatment Condition
Solution Annealed ≥ 1020°C, rapid quenched
Weldability & Machinability
Readily weldable
Machinable in annealed condition
Dual-certifiable against F51 (S32205 meets S31803 limits, not vice-versa).
Typical Applications
Subsea & Offshore Rigs Pressure Vessels Heat Exchanger Tubesheets Pulp & Paper Bleach Plant Marine Structures

Saudi Aramco Approved Stainless Steel 304l Hexagonal Hollow Bar Stock in Custom Sizes and Thickness

Sizes Chart Of Stainless Steel Hexagon Bar

Explore Stainless Steel Hex Bar Stockists in Saudi Arabia that provide size charts and scalable solutions for rugged conditions

Sizes in InchStainless Steel Hex Bar Sizes In inch
H-1/41/4
H-1/81/8
H-3/163/16
H-5/325/32
H-5/165/16
H-7/327/32
H-7/167/16
H-3/83/8
H-1/21/2
H-7/87/8
H-5/85/8
H-9/169/16
H-3/43/4
H-11/1611/16
H-1-1/81-1/8
H-11
H-22
H-1-1/41-1/4
H-1-1/21-1/2
H-1-3/81-3/8
H-1-3/41-3/4
H-1-5/81-5/8
H-2-1/42-1/4
H-1-7/81-7/8
H-2-1/22-1/2
H-2-3/42-3/4
H-33

Get Competitive Quotes from Top 10 Trusted SABIC Approved Stainless Steel Hex Bar Stockists in Saudi Arabia

No login required · No commission · Direct contact with actual stainless steel hex bar suppliers in Saudi Arabia

Send RFQ

Stainless Steel Hex Bar Supply Details

A/F Size Tolerance & Range

  • Size range: 12mm to 50mm A/F
  • Governing standard: EN 10061-2003
  • Tolerance as per product & size required

Supply Conditions

  • Annealed
  • Solution Annealed
  • Strain Hardened
  • Quenched & Tempered
  • Double Ageing
  • Double Tempering

Testing of SS Hex Bar

  • Tensile Test
  • Hardness Test
  • Impact Test
  • Ultrasonic Test
  • MPI Test

Length Tolerance & Straightness

  • Cut to length tolerance: -0 / +10 mm
  • Straightness: up to 0.25mm per metre

Packing of Stainless Hexagon Bar

  • Bars packed in bundles
  • Each bar colour-coded for grade identification
  • Wrapped in HDPE with strapping
  • Identification labels fixed on each bundle

Material Grades (AISI / ASTM)

  • 201, 202, 303, 304, 304H, 304L
  • 316, 316H, 316L, 309, 310, 316Ti
  • 317, 347, 321, 410, 416, 420
  • 430, 430F, 431, 630, 17-4 PH, 15-4 PH, F51, F60
  • Grades customizable to suit client requirements

Benefits Of Stainless Steel Hex Bar

Benefits Of Stainless Steel Hex Bar
  • High Tensile Strength
  • Good Ductility
  • Shock Resistance
  • Corrosion Resistance
  • Durability
  • Machinability

Stainless Hex Bar Thickness

Buy ADNOC Approved Stainless Steel Hex Bar Stockists in Saudi Arabia that supply thickness fit for purpose products tailored for industrial markets

Thickness4 mm to 400 mm

Hot Rolled vs Cold Drawn SS Hex Bar

Saudi Aramco approved stainless steel hex bar suppliers stock 304, 316 and 410 grades cut to size with full mill traceability

Choose Hot Rolled When

  • Bar will be heavily machined afterward
  • Project budget is cost-sensitive
  • Tight A/F tolerance is not critical
  • Material is for structural or rough-cut use

Choose Cold Drawn When

  • Parts go straight to CNC with minimal stock removal
  • Drawing calls for h9-h11 tolerance
  • A bright, scale-free surface is required
  • Production volumes justify the cost premium

You Can Save 30%-40% Cost When Ordering SS 316l Cold Rolled Hexagon Bars Directly From the Stockists in Riyadh

Types of Stainless Steel Hexagon Bar in Stock

Stainless Steel Hex Bar suppliers in Saudi Arabia support both small cut-length orders and full mill-length bar supply

Stainless Steel Hexagonal Hollow Bar
Stainless Steel Hexagonal Hollow Bar
  • Bored center, reduced weight
  • OD/ID per drawing requirement
  • Used for shafts & spacers
SS Hexagonal Bar
SS Hexagonal Bar
  • A/F: 3mm - 100mm
  • 304, 316, 410 grades
  • Cut to size on request
Stainless Hex Rod
Stainless Hex Rod
  • Length: 1m to 6m
  • Bright & black finish
  • Suited for bolts & studs
Stainless Steel Hex Stock
Stainless Steel Hex Stock
  • Mill-length & cut-length stock
  • EN 10204 3.1 MTC available
  • Ready for CNC feed
SS Cold Rolled Hexagon Bars
SS Cold Rolled Hexagon Bars
  • Tolerance: h9 - h11
  • Bright, smooth finish
  • Tight A/F for precision parts
Stainless Steel Hot Rolled Hex Bar
Stainless Steel Hot Rolled Hex Bar
  • A/F: 10mm - 100mm
  • Black, scaled surface
  • ASTM A276 Condition A

Talk Directly to a Stainless Steel Hex Bar Supplier in Saudi Arabia

Send to pipingmaterial.sa the grade, size and quantity and Get Quote From Top 10 Genuine Stainless Steel Hex Bar Stockists in Saudi Arabia

Request Quote Now

Stainless Steel Hex Bar Stock Application

Saudi Aramco Approved Stainless Steel Hex Bar Suppliers in Saudi Arabia Provide Cut-to-Length Bars for Industrial Applications

Bolts, Studs & Hex Nuts
Valve Stems & Spindles
Pump & Compressor Shafts
Refinery & Petrochemical Fittings
Marine & Offshore Fasteners
Desalination Plant Hardware
Precision CNC Machined Parts
Surgical & Medical Instrument Stock
Construction & Structural Hardware
Food & Pharma Processing Equipment
Automotive & Tooling Components
Cutlery & Surgical Tool Blanks
Supply Stainless Steel 410 Hot Rolled Hex Bar With H&T, ANN, PH State and Smooth Turned, Polished Finish

Finishes Of SS Hex Bar

ADNOC approved stainless steel hex bar stockists supply bright and polished finishes with EN 10204 3.1 MTC

Black / Hot Rolled - As-rolled, scaled surface, lowest cost
Bright / Cold Drawn - Smooth, scale-free, tight tolerance
Polished - Fine finish for visible or hygienic use
Centerless Ground - Precision diameter for direct CNC feed

Stainless Steel Hex Bar Price Factors in Saudi Arabia

PED approved stainless steel hex bar comes with third-party inspection reports for pressure equipment and valve component use

Grade

  • 316 costs more than 304
  • 17-4 PH is a premium grade
  • 201, 430 are lower cost

Finish

  • Cold drawn costs more than hot rolled
  • Larger A/F sizes cost more per kg
  • Ground finish adds a surcharge
Prices move with LME nickel rates - always request a fresh RFQ.
Before Ordering, Check Stainless Steel Hex Stock Dimensions and Weight Chart

SS Hexagonal Rod Dimensions

Stainless Steel Hex Bar suppliers in Saudi Arabia maintain ready stock from 3mm to 100mm A/F, cut to length on request.

Length in inchSize in InchWeight lbs/ft
1443/80.415
1/20.735
5/81.15
3/41.655
12.945
1 1/83.73
1 3/85.58
1 5/87.78
447.16
1/40.18
7/160.565
9/160.93
11/161.39
7/82.255
1 1/163.31
1 1/44.6
1 1/26.63
211.79

Weight Chart Of Stainless Steel Hex Rod

View Stainless Steel Hex Bar Traders in Saudi Arabia that provide weight charts and field ready equipment for hostile environments

Imperial inchMetric mm
DiamWeight kg/mDiamWeight kg/m
1,8750.1430.06
3,1250.3970.3
3750.5690.5
4,3750.76100.62
6251.55131.04
6,8751.88141.21
9,3753.49171.78
21,8750.1940.1
250.2550.15
28,1250.3260.22
34,3750.4780.39
5,6251.26120.89
50.99110.74
8753.04161.57
752.23151.38
Ex-Stock Network Across Saudi Arabia

SS Hex Bar suppliers in Dammam dispatch black and bright finish bars same day for urgent fastener orders.

🌎 Countries Sudan  South Africa  Ivory Coast  Rwanda  Congo  Republic of the Congo Kenya  Nigeria  Gabon  Cameroon  Equatorial Guinea  Chad  Benin  Togo West Africa Ghana 
Kenya
Nairobi
Kenya
Ethiopia
Addis Ababa
Ethiopia
South Africa
Durban
South Africa
Nigeria
Abuja
Nigeria
South Africa
Cape Town
South Africa
Nigeria
Lagos
Nigeria
Ethiopia
Addis Ababa
Ethiopia
South Africa
Johannesburg
South Africa

Manufacturing Process of SS 316 Hex Bar

KNPC Approved Supplier of Stainless Steel Hex Bar in Riyadh offers centerless ground bars for direct CNC machining without rework

Melting
Target chemistry
Hot Rolling
Hexagon-profile passes
Annealing
Relieve rolling stresses
Pickling
Removes scale and oxide layer
Cold Drawing
Bright finish & tight tolerance
Straightening & Cutting
Inspected and cut to length

Hexagonal Hollow Bar Chemical Composition

Explore Stainless Steel Hex Bars Suppliers that offer time tested industrial solutions with optimized chemical compositions

GradeSS 316LSS 304LSS 316SS 304
C2.00 max0.03 max0.08 max0.03 max
Cr14.00 Max18 - 2015 - 1818 - 20
N0.1 Max0.10 Max0.1 Max0.10 Max
P0.046 max0.046 max0.046 max0.046 max
Si0.75 max0.75 max0.75 max0.75 max
Mn18.00 max2 max2 max2 max
Ni0.10 Max8 - 1210 - 148 - 12
S0.030 max0.030 max0.030 max0.030 max

Warehouse Locations of Partner Suppliers

Stockist of SS 316 Hex Bar in Al Khobar supplies molybdenum-bearing bars suited to marine applications

Sales Agents in Following Locations
Turkey
Turkey
Saudi Arabia
Saudi Arabia
Iraq
Iraq
UAE
UAE
Jordan
Jordan
Lebanon
Lebanon
Oman
Oman
Qatar
Qatar
Also covers Syria • Yemen • Iraq • Turkey on request
GCC Countries
Qatar
Qatar
Saudi Arabia
Saudi Arabia
UAE
UAE
Bahrain
Bahrain
Oman
Oman
Kuwait
Kuwait
All 6 GCC member states covered — ex-stock & indent supply
MENA Countries
Morocco
Morocco
Casablanca
Egypt
Egypt
Cairo
Libya
Libya
Tripoli
Tunisia
Tunisia
Tunis
Algeria
Algeria
Algiers
SCZone
SCZone
Suez Canal
North Africa & Levant — regular sea freight schedules

Mechanical Properties Of ASTM A276 Stainless Hex Bar

Identify Stainless Steel Hex Bars Suppliers that offer load bearing systems with mechanical properties designed for heavy duty applications

GradeSS 316LSS 304LSS 316SS 304
Yield Strength170 Min.30000 Psi ,205 (MPa)30000 Psi ,205 (MPa)30000 Psi ,205 (MPa)
Density8.0 g/cm38.0 g/cm38.0 g/cm38.0 g/cm3
Tensile Strength485 Min75000 Psi ,515 (MPa)75000 Psi ,515 (MPa)75000 Psi ,515 (MPa)
Elongation40%40%35%40%
Melting Point1400 °C (2550 °F)1400 °C (2550 °F)1454 °C (2650 °F)1400 °C (2550 °F)

Approvals

Saudi Aramco, SABIC, ADNOC & KNPC Approved SS 316 Hex Bar Suppliers

SS 304 Hex Bar stockist in Yanbu keeps annealed and cold drawn sizes ready for general fabrication and bolting work

Saudi Aramco Approved Suppliers

  • Viraj Profiles Ltd
  • Jindal Stainless

SABIC & ADNOC Approved

  • Outokumpu Stainless
  • Jindal Stainless

KNPC & Qatar Energy Approved

  • Viraj Profiles Ltd
  • Outokumpu Stainless

International & Quality Approvals

  • Lloyd's Register Approved
  • PED 2014/68/EU Listed
  • NORSOK M-650 Compliant
Explore Nearby Locations for the Quickest Delivery Options

Stainless Steel Hex Bar manufacturer in Saudi Arabia rolls bars to ASTM A276 sizes with hardness and tensile testing

Azerbaijan
Azerbaijan
Baku
Georgia
Georgia
Tbilisi
Andorra
Andorra
Andorra la Vella
Belgium
Belgium
Brussels
Armenia
Armenia
Yerevan
France
France
Paris
Italy
Italy
Rome
Netherlands
Netherlands
Amsterdam
Germany
Germany
Berlin

Stainless Steel Hex Bar Equivalent

SS Hex Bar suppliers in Jubail hold 316 and 316L stock for desalination and petrochemical plant applications

🇺🇸

United States (UNS / ASTM)

  • UNS S30400 (Type 304, ASTM A276)
  • UNS S31600 (Type 316, ASTM A276)
  • UNS S41000 (Type 410, ASTM A276)
  • UNS S17400 (17-4 PH, Type 630)
🇩🇪

Germany (Werkstoff / DIN)

  • WNR 1.4301, X5CrNi18-10 (304)
  • WNR 1.4401, X5CrNiMo17-12-2 (316)
  • WNR 1.4006, X12Cr13 (410)
  • WNR 1.4542, 17-4 PH equivalent
🇯🇵

Japan (JIS)

  • SUS304, JIS G4303 hex bar
  • SUS316, JIS G4303 hex bar
  • SUS410, martensitic JIS grade
  • Mills: Nippon Steel, Daido
🇮🇳

India (IS / BIS)

  • Supplied to UNS / ASTM A276
  • Mills: Viraj, Mukand, Jindal
  • Cold drawn bright hex bar
  • EN 10204 3.1 certified
🇸🇪

Europe & Sweden (EN)

  • EN 10088-3 hexagon bar standard
  • SS 2333 Swedish reference (316)
  • SS 2343 Swedish reference (316L)
🇰🇷

South Korea (KS)

  • Supplied to ASTM A276 / A479
  • KS D 3706 cross-reference
  • Mills: POSCO, Sammi Steel
🇬🇧

United Kingdom (BS)

  • BS 970 304S31 cross-reference
  • BS 970 316S31 cross-reference
  • BS EN 10088-3 hexagon bar
🇦🇺

Australia (AS)

  • AS 1314 stainless bar reference
  • 304 & 316 marine grade hex stock
  • Used in desalination & mining sectors

Lead Time for 304 SS Hex Bar Delivery to Riyadh, Dammam & Jeddah

NORSOK approved stainless steel hex bar is supplied in PMI-tested heats for offshore and marine applications

SourceTypical Lead TimeNotes
Local KSA ex-stockSame day to 2 daysDammam & Riyadh warehouse pickup
UAE regional stock2-4 daysTrucked across the GCC corridor
India sea freight10-14 daysInto King Abdulaziz Port, Dammam
Europe / Korea air freight3-5 daysUsed for urgent shutdown requirements
Custom-rolled / non-stock size4-8 weeksMill production run plus shipping

316L Stainless Steel Hex Bar Tolerance Chart

SABIC approved SS hex bar suppliers offer cold drawn and hot rolled stock in h9-h11 tolerance for fastener manufacturing

NOMINAL SIZEph8h6h9h12H10h7H11
DIAMETER mm
~ to 3+0.004/0+0.014/0+0.006/0+0.025/0+0.1/0+0.04/0+0.01/0+0.06/0
over 3 to 6+0.005/0+0.018/0+0.008/0+0.03/0+0.12/0+0.048/0+0.012/0+0.075/0
over 120 to 180+0.018/0+0.063/0+0.025/0+0.1/0+0.4/0+0.16/0+0.04/0+0.25/0
over 6 to 10+0.006/0+0.022/0+0.009/0+0.036/0+0.15/0+0.058/0+0.015/0+0.09/0
over 18 to 30+0.009/0+0.033/0+0.013/0+0.052/0+0.21/0+0.084/0+0.021/0+0.13/0
over 50 to 80+0.013/0+0.046/0+0.019/0+0.074/0+0.3/0+0.12/0+0.03/0+0.19/0
over 10 to 18+0.008/0+0.027/0+0.011/0+0.043/0+0.18/0+0.07/0+0.018/0+0.11/0
over 80 to 120+0.015/0+0.054/0+0.022/0+0.087/0+0.35/0+0.14/0+0.035/0+0.22/0
over 30 to 50+0.011/0+0.039/0+0.016/0+0.062/0+0.25/0+0.1/0+0.025/0+0.16/0
over 180 to 250+0.02/0+0.072/0+0.029/0+0.115/0+0.46/0+0.185/0+0.046/0+0.29/0
Our Wide Clientele in Following Locations

Stainless Steel Hex Bar suppliers in Saudi Arabia export across 201 to 630 grades with cut-to-size and bulk options

Singapore Flag
Singapore
City-State
Vietnam Flag
Vietnam
Ho Chi Minh
Brunei Flag
Brunei
Bandar Seri
Taiwan Flag
Taiwan
Taipei
Laos Flag
Laos
Vientiane
Indonesia Flag
Indonesia
Jakarta
Thailand Flag
Thailand
Bangkok
Philippines Flag
Philippines
Manila
Mongolia Flag
Mongolia
Ulaanbaatar
Myanmar Flag
Myanmar
Naypyidaw
Malaysia Flag
Malaysia
Kuala Lumpur
Cambodia Flag
Cambodia
Phnom Penh

Governing International Standards for SS Hex Bar

Stainless Steel Hex Bar suppliers in KSA provide grade 410, 420 and 17-4 PH bars for shafts and valve stems

ASTM A276 ASME SA276 ASTM A479 ASME SA479 ASTM A484 EN 10088-3 DIN 671 JIS G4303 BS 970 AS 1314 NACE MR0175 / ISO 15156 EN 10204 3.1 / 3.2

Stainless Steel Hex Bar Client Reference

SS Hex Bar suppliers in Jeddah cut bars to exact drawing length with polished or hot rolled surface options

Refinery Valve & Flange Workshop
22mm A/F SS 316 Hex Bar
Saudi Aramco Jubail Refinery Vendor
Jubail, Saudi Arabia
Seawater Desalination Plant
17mm A/F SS 316L Hexagonal Bar
SWCC Ras Al-Khair Facility
Ras Al-Khair, Saudi Arabia
Bolt & Stud Fastener Manufacturer
3/4" SS 316H Hex Bar
Bossard Industrial Fasteners
Dammam, Saudi Arabia
Shipyard Marine Fastener Order
1" SS 303 Hex Bar
Damen Shipyards Group
Rotterdam, Netherlands
Pump & Compressor Shaft Workshop
32mm A/F 17-4 PH Hex Bar
Weir Group Oil & Gas Division
Houston, United States
Pharmaceutical Equipment Workshop
1/2" SS 304h Hex Bar for CNC Components
Sanofi Manufacturing Facility
Frankfurt, Germany

Other Stainless Steel Hex Bar Grades We Supply

Beyond 304 and 316, pipingmaterial.sa stockists hold a full family of specialty hex bar grades for industrial project requirements

⚖️

High-Temperature Austenitic

  • SS 309 and 310 Hex Bar - furnace & heat-treatment fixtures
  • 316Ti - high-temp piping
  • 317 - higher Mo for stronger acid resistance
🔥

Stabilized Austenitic

  • SS 321 Hex Bar - resists weld decay
  • 347 Hex Bar - niobium-stabilized, high-temp service
  • SS 202 Hexagonal Bar - manganese-substituted, economy grade
⚙️

Martensitic (Heat Treatable)

  • SS 410 and 416 Hex Bar - shafts, pump & valve parts
  • Stainless Steel 420 Hex Bars - cutlery & surgical tool blanks
  • 431 Hex Bars - high strength, marine pump shafts
🧭

Ferritic

  • Stainless Steel 430 Hex Bar - economical, magnetic, mild corrosion duty
  • SS 430F Hex Bar - free-machining ferritic variant
🛡️

Precipitation Hardening

  • 630 / 17-4 PH - aerospace & valve stem duty
  • 15-5 PH - higher toughness PH variant
  • Aged to strengths above 1300 MPa
🌍

Duplex Stainless

  • F51 Hex Bar - UNS S31803, standard duplex
  • F60 Hex Bar - UNS S32550, super duplex grade
  • High strength for offshore & subsea use

Common Buyer Questions on Stainless Hex Bar

Which stainless steel hex bar A/F sizes are available ex-stock in Dammam & Jubail?▼
  • 3 mm to 100 mm A/F across 304, 316, 410
  • Common fastener sizes: 10mm, 17mm, 22mm, 32mm
  • Standard length: 3 to 6 metres, cut to length
  • Large A/F bars over 65mm on indent basis
How long does it take to get stainless steel hex bar delivered to Riyadh?▼
  • Local KSA ex-stock: same day for Riyadh, 1-2 days regional
  • UAE warehouse stock: trucked in roughly 2-4 days
  • Imported from India: 10-14 day sea voyage
  • Europe or Korea: air freight in 3-5 days for urgent need
Can 304 stainless steel hex bar be used for outdoor marine fasteners?▼
  • 304 is generally not recommended for continuous coastal exposure
  • 316/316L is the preferred grade for marine and offshore use
  • Use 304 only for indoor or low-chloride environments
What is the difference between ASTM A276 and ASTM A479 for hex bar?▼
  • A276 covers general engineering use stainless bars
  • A479 is specific to pressure vessel and boiler service bar
  • A479 requires additional inspection and hardness testing
  • Type 303 is excluded from A479 pressure vessel use
Products
Buy Online
Best Price
Contact

© 2026 pipingmaterial.sa — All Rights Reserved

Meet verified exporters, suppliers, distributors, manufacturers and actual stockist. Fast and easy way to buy duplex steel and high nickel alloys. Direct connect with stockholders and suppliers. Trusted by thousands of engineers since 2016. Pipingmaterial.sa help buyers to procure seamless pipes, tubing, bars, nut bolt, flanges and pipe fittings in saudi arabia. Refer pipingmaterial.sa for stock sizes, weight chart, quick quote, multiple competitive price list and nickel alloys material for shutdown projects. 100+ brands in stock including Sandvik, Vallourec & Mannesmann, Tenaris, Seah Steel Corp., Welspun, Tubacex, Outokumpu, Viraj, Ulma, Erne Fittings, Jindal, and many more. Send inquiry and get multiple quotes from Top 10 Verified Suppliers. Guaranteed fast quote, competitive price and quick delivery in Saudi Arabia.

⚡ FAST RESPONSE Get Quote in 2 Hours We respond quickly
📧 Your Email 📱 Your WhatsApp No. 🔍 What are you looking for?— choose how to reach you —
🛡️ Free quote · No commitment
Get Quote in 2 Hrs ‹
⚡ FAST RESPONSE Get Quote in 2 Hours We respond quickly
📧 Your Email 📱 Your WhatsApp No. 🔍 What are you looking for?— choose how to reach you —
🛡️ Free quote · No commitment